Nikon’s first ever FX format (full-frame) camera enables photographers who work under extreme conditions to stay ahead of the game. The D3 features a highly sensitive 12.2 megapixel CMOS sensor that boasts an extendable ISO range of 200 to 6400, and its Kevlar/carbon fiber-composite shutter and EXPEED image processing engine enable it to shoot at a staggering 9 fps (11 fps in DX Crop mode). The advanced Scene Recognition System delivers superior exposures and is supported by Nikon’s next-generation 51-point AF system, which offers broad coverage and high sensitivity in low light. Selectable Picture Controls streamline in-camera image processing, saving time in post-production, and a high definition 3-inch LCD screen supports two Live View modes plus an HDMI video output. Protected by a tough, environmentally-sealed magnesium alloy body, the D3 sets the benchmark for professional action photography.
12.2 megapixel FX (full-frame) CMOS sensor with high signal-to-noise ratio, wide dynamic range and 12-channel readout.
ISO 200 – 6400 : extendable up to 25600 (equivalent) and down to ISO 100 (equivalent).
9fps consecutive shooting (11fps in DX Crop mode)
EXPEED image processing engine with 14-bit A/D conversion and 16-bit image processing for superb tonal gradation.
Advanced Scene Recognition System combines the camera’s metering and AF sensors for precise exposures and sharply defined images.
Multi-CAM3500FX 51-point AF system . Individually selectable or configurable in 9-point, 21-point and 51-point coverage settings.
Picture Controls streamline in-camera image processing by enabling customization of image parameters before capture and offer complete control over sharpening, contrast, brightness, hue and saturation in various color modes.
920,000 dot 3-inch VGA LCD monitor with wide, 170-degree viewing angle.
Live View with Autofocus enables composition of images using the LCD monitor. Two modes are supported: Handheld or Tripod.
Two Crop Modes : DX format and 5:4 ratio. The DX crop mode can be automatically enabled when a DX lens is attached.
Quick response : approx. 37 ms shutter-lag and 55 ms viewfinder black-out.
Highly accurate, durable Kevlar/carbon fiber-composite shutter unit : Standard rating of 300, 000 cycles, with a maximum shutter speed of 1/8,000 sec and flash synchronization at up to 1/250 sec.
Active D-Lighting enables superior high-contrast images by automatically applying tone compensation at the moment of capture.
Dual CF card slots : configurable for parallel (simultaneous) or serial (consecutive) recording.
HDMI video output interface enables connection to high-definition video systems.
Intuitive ergonomics with optimized button placement for fast and comfortable handling.
Durable Magnesium alloy body built to withstand the rigors of the harshest of environments.
Wireless LAN and Ethernet support via optional Wireless Transmitter WT-4.
Type of Camera
Single-lens reflex digital camera with interchangeable lenses
CMOS sensor, 36.0 x 23.9 mm; total pixels: 12.87 million; Nikon FX format
ISO 200 to 6,400 in steps of 1/3, 1/2, or 1 EV; sensitivity decreases approx. 0.3, 0.5, 0.7, or 1 (ISO 100 equivalent) EV below ISO 200, and increases approx. 0.3, 0.5, 0.7, 1 (ISO 12,800 equivalent), or 2 (ISO 25,600 equivalent) EV over ISO 6,400
CompactFlash (Type I/II, compliant with UDMA); Microdrives
Compliant with DCF 2.0, DPOF and Exif 2.21
Compressed 12/14 bit NEF (RAW, Lossless compressed): approx. 60-80% Compressed 12/14 bit NEF (RAW, Compressed): approx. 45-60% JPEG: JPEG-baseline-compliant; can be selected from Size priority and Optimal quality
Auto (TTL white balance with main image sensor and 1,005-pixel RGB sensor); Seven manual modes can be preset with fine-tuning; color temperature setting; white balance bracketing: 2 to 9 exposures in increments of 1, 2 or 3
Handheld mode: TLL phase-difference AF with 51 focus areas (15 cross-type sensors) Tripod mode: focal-plane contrast AF on a desired point within a specific area
3-in., approx. 920,000-dot (VGA), 170-degree wide-viewing-angle, 100% frame coverage, low-temperature polysilicon TFT LCD with brightness adjustment
1) Full frame, 2) Thumbnail (4 or 9 segments), 3) Zoom, 4) Slide show, 5) Histogram indication, 6) Shooting data, 7) Highlight point display, 8) Auto image rotation
NTSC or PAL; simultaneous playback from both the video output and on the LCD monitor available
Supports HDMI version 1.3a; Type A connector is provided as HDMI output terminal; simultaneous playback from both the HDMI output terminal and on the LCD monitor not available
Nikon F mount with AF coupling and AF contacts
1) Type G or D AF Nikkor: All functions supported 2) DX AF Nikkor: All functions supported except FX-format (36x24)/5:4 (30x24) image size 3) AF Nikkor other than type G or D3: All functions supported except 3D Color Matrix Metering II 4) AI-P Nikkor: All functions supported except autofocus and 3D Color Matrix Metering II 5) Non-CPU AI Nikkor: Can be used in exposure modes A and M; electronic range finder can be used if maximum aperture is f/5.6 or faster; Color Matrix Metering and aperture value display supported if user provides lens data.
Equivalent to angle produced by lens focal length (1.5 times when DX format is selected)
SLR-type with fixed eye-level pentaprism; built-in diopter adjustment (-3 to +1 m-1)
18 mm (-1.0 m-1)
Type B BriteView Clear Matte VI screen
Viewfinder Frame Coverage
Approx. 100% (vertical/horizontal)
Approx. 0.7x (50mm f/1.4 lens at infinity; -1.0 m-1)
Instant-return type, with depth-of-field preview button
• TTL phase detection, 51 focus points (15 cross-sensors) by Nikon Multi-CAM 3500FX autofocus module; detection range: -1 to +19 EV (ISO 100 at 20°C/68°F); AF fine adjustment possible • Focal-plane contrast [in Liveview (Tripod) mode]
1) Autofocus: Single-servo AF (S); continuous-servo AF (C); focus tracking automatically activated according to subject status, 2) Manual focus (M) with electronic rangefinder
Single AF point can be selected from 51 or 11 focus points
1) Single-point AF, 2) Dynamic AF [number of AF areas: 9, 21, 51, 51 (3D-tracking)], 3) Automatic–area AF
Focus can be locked by pressing AE-L/AF-L button or by pressing shutter-release button halfway (single-point AF in AF-S)
Exposure Metering System
TTL full-aperture exposure metering using 1,005-pixel RGB sensor 1) 3D Color Matrix Metering II (type G and D lenses); Color Matrix Metering II (other CPU lenses); Color Matrix Metering (non-CPU lenses if user provides lens data) 2) Center-weighted: Weight of 75% given to 8, 15 or 20-mm circle in center of frame, or weighting based on average of entire frame 3) Spot: Meters 4-mm circle (about 1.5% of frame) centered on selected focus area (on center focus area when non-CPU lens is used)
1) 0 to 20 EV (Matrix or center-weighted metering), 2) 2 to 20 EV (Spot metering) (ISO 100 equivalent, f/1.4 lens, at 20°C/68°F)
Exposure Meter Coupling
Combined CPU and AI
1) Programmed Auto (P) with flexible program, 2) Shutter-Priority Auto (S), 3) Aperture-Priority Auto (A), 4) Manual (M)
±5 EV in increments of 1/3, 1/2 or 1 EV
Exposure and/or flash bracketing (2 to 9 exposures in increments of 1/3, 1/2, 2/3 or 1 EV)
Picture Control System
Four setting options: Standard, Neutral, Vivid, Monochrome; each option can be adjusted
Exposure locked at detected value with AE-L/AF-L button
Electronically-controlled vertical-travel focal-plane shutter; 1/8,000 to 30 s in steps of 1/3, 1/2 or 1 EV; Bulb
X = 1/250 s; flash synchronization at up to 1/250 s
1) TTL flash control with 1,005-pixel RGB sensor; i-TTL balanced fill-flash and standard i-TTL fill-flash available with SB-800, 600 or 400 2) Auto aperture (AA): Available with SB-800 and CPU lens 3) Non-TTL auto (A): Available with SB-800, 28, 27 or 22s 4) Range-priority manual (GN): Available with SB-800
Flash Sync Modes
1) Front-curtain sync (normal), 2) Slow sync, 3) Rear-curtain sync, 4) Red-eye reduction, 5) Red-eye reduction with slow sync
Standard ISO 518 hot-shoe contact with safety lock
ISO 519 standard terminal
Creative Lighting System
With Speedlights such as SB-800, SB-600, SB-R200, supports Advanced Wireless Lighting, Auto FP High-Speed Sync, Flash Color Information Communication, modeling flash and FV lock
Electronically controlled timer with duration of 2, 3, 10 or 20 s
Depth-of-field Preview Button
When CPU lens is attached, lens aperture can be stopped down to value selected by user (A and M modes) or value selected by camera (P and S modes)
1) GPS: NMEA 0183 (Ver. 2.01 and 3.01) interface standard supported with 9-pin D-sub cable and GPS Cable MC-35 (optional) 2) Remote control: via 10-pin terminal
Chinese (Simplified and Traditional), Dutch, English, Finnish, French, German, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish, Swedish
One Rechargeable Li-ion Battery EN-EL4a/EL4, Quick Charger MH-22, AC Adapter EH-6 (optional)
1/4 in. (ISO 1222)
Dimensions (W x H x D)
Approx. 159.5 x 157 x 87.5 mm (6.3 x 6.2 x 3.4 in.)
Approx. 1,240 g (2.7 lb.) without battery, memory card, body cap or accessory shoe cover
Temperature: 0-40°C/32-104°F, Humidity: under 85% (no condensation)
Rechargeable Li-ion Battery EN-EL4a, Quick Charger MH-22, USB Cable UC-E4, Audio Video Cable EG-D2, Camera Strap AN-D3, Body Cap BF-1A, Accessory Shoe Cap BS-2, Eyepiece DK-17, Battery Chamber Cover BL-4, USB Cable Clip, Software Suite CD-ROM
Main Optional Accessories
Wireless Transmitter WT-4, Magnifying Eyepiece DK-17M, AC Adapter EH-6, Camera Control Pro 2 Software, Image Authentication Software
1. With Continuous-servo AF, S or M exposure mode, shutter speed 1/250 s or faster; other settings are set at “Default”.
2. IX Nikkor lenses can not be used.
3. Excluding lenses for F3AF.
4. Supplied accessories may differ depending on country or area.
CompactFlashTM is a trademark of SanDisk Corporation. Products and brand names are trademarks or registered trademarks of their respective companies.
Specifications and equipment are subject to change without any notice or obligation on the part of the manufacturer. August 2007
©2007 NIKON CORPORATION